Hirsch Bagnore light brown 20mm — vegetable-tanned Tuscan leather watch strap

Tuscan leather watch strap 20mm light brown, vintage look

The light brown 20mm Bagnore Tuscan leather watch strap wears an unapologetic vintage look. Natural open-pore calf, vegetable tanning, drum milling. The sienna earth shade, set off by a light design, points straight to the colours of Tuscany.

Vegetable-tanned Tuscan calf

The Bagnore is cut from natural open-pore calf, vegetable tanned. The long, complex drum milling gives this leather its suppleness and its living grain.

Raw-cut edges, already patinated

The edges are cut with a retro touch and patinated, as is the buckle. This is not simulated wear: it is a deliberate finish, and it will age in the same direction as the leather.

Triple hand-sewn lock stitch

The lock stitch is triple and sewn by hand. On a supple vegetable-tanned leather, that is what keeps the buckle pass from deforming over time.

Our pairing suggestions

The full width is in our Hirsch straps 20mm. The other Bagnore: the Bagnore black 20mm. In the same Tuscan leather but strongly curved with contrast stitching, the Hirsch Lucca black 20mm and the Hirsch Lucca gold-brown 20mm: these are where to look if the Bagnore is no longer available in your shade. For a more military vintage, the Hirsch Ranger black 20mm and its ecru stitching. Our guide to choosing a watch strap compares the Tuscan leathers in the range.

Technical specifications

• Lug width: 20mm
• Material: natural open-pore Tuscan calf, vegetable tanned, drum milled, light brown
• Finishing: raw-cut edges with a retro touch, edges and buckle patinated
• Stitching: triple hand-sewn lock stitch
• Length: L standard (200mm)
• Buckle: steel, supplied
• Attachment: tool-free Hirsch Quick Release spring bars
• Origin: Austria