BELL And ROSS Arezzo

Bell Ross BR03 and BR01 straps: 24 mm lug width

The Bell Ross BR03 BR01 strap calls for a 24 mm lug width and a 24 mm buckle — a combination few standard straps offer. The square case adds a design constraint: too domed a strap breaks the geometry of the watch. Our models keep a linear thickness.

Oval holes, compatible with your original buckle

The holes on these straps are oval, 6 mm, not round. They therefore accept original Bell Ross buckles. For a collector, keeping the signed buckle is often the deciding point — and that is exactly what this build allows.

Which Bell Ross models

BR01, BR03 and BRX1, that is cases from 42 to 46 mm. Our guide to choosing a watch strap explains the measurement if you are unsure of your reference.

Raw nubuck, alligator or waterproof

The BR03 BR01 Horseman strap in natural nubuck leaves the surface raw on both sides, with cream stitching. The honey Darkgator alligator and the black Darkgator move to exotic skins, under CITES certificate, tanned in Tuscany. For sporting use, the waterproof Racing strap adds a rubber lining.

Going further

The same leathers exist in a conventional build in the 24mm Panerai strap, which shares the lug width. The full collection sits in Arezzo leather straps. In fabric, our 24mm NATO straps also fit a square case. Changing over needs only a watchmaker's screwdriver: our video guide shows the move.